How to Choose the Relay to Avoid the Failure?

As a Power Relay Supplier, share with you.
Power Relay
Power Relay
1. What is the problem caused by the coil disconnection of the Power Relay? Generally, when most of the relay lines have a disconnection fault, first check whether the disconnection is at the relay pin (prone to the fault of false soldering). Using tweezers to fiddle with each lead, you can quickly find the fault point.
2. The contact loosening and cracking occurred in the relay, mainly due to the loose contact of the relay, the contact cracking or the size deviation is too large. Contact loosening occurs, contact manufacturing, riveting or spot welding is in progress. And also because the material has tolerances, it is determined by the length of each cut.
3. Due to the wide variety of coils used in relays, generally speaking, there are several materials such as outsourcing and non-outsourcing. Therefore, if it is a collision and cross-linking, it may cause disconnection when the coils are separated. So usually the pressure adjustment of the relay should not be suitable for too many changes. Otherwise, it will cause the coil to be wrongly welded, and there is also the need to pay attention when the relay is assembled and welded, so as not to cause the relay to be reversed.
4. The relay is mainly designed to cut off the current and avoid burning the circuit. Generally, there are many types of relays. For example, the relay is divided into single, double, and multiple, and the performance characteristics of different relays with different specifications are also different. Just like the single unit, it is mainly a single working relay. Secondly, the duplex is a relay that can work together or support a single job. Therefore, the relays of different specifications cannot be randomly used or replaced, otherwise, if the selected relay is not applicable, it may easily cause damage.
5. For the normal ambient temperature where the relay works, generally the current withstands will easily cause poor heat dissipation, so most cases will cause damage to the relay output semiconductor device, so it is recommended to choose more High-power heat sinks are used in parallel installation.
Our company also has NB901 Relay for sale, please contact us.

评论

发表评论

此博客中的热门博文

How to Buy a Good Relay?

图片
As a  Power Relay Manufacturer , I often meet some customers who say that the quality of your relay is still ok, it is more expensive. Some customers say that I want good quality and cheaper prices. Here, we give everyone a generalization. In fact, the good or bad of Power Relay, 60% is determined by the contacts, reeds, outer casing, thin wire, base, etc. of the relay, and 40% of them are assembled in the relay. Determined in the process. Think about it, if the relay parts are poor, how well the relays are assembled on the production line, and will not make good  PCB Power Relays . Just like a chef, you give him poor raw materials, how good his cooking skills are, and he can't fry good dishes. Therefore, if you have a piece of money and a good quality, it will be more expensive. Power Relay So how do we see the relays are good and bad? If you are interested in researching and taking two different brands, you can see the difference if you study it carefully. Take our relay
阅读全文

What Are The Methods For Relay Debugging?

图片
What are the methods for  Relay Debugging ? The following small series explains for you: 1. Before using the relay, check whether there is any damage caused during transportation. Set the relay to the first setting point, turn the movable system to the magnetic pole direction by hand, and then release it. The movable system should be turned back to the original. Position until the stop. 2. When the relay is re-adjusted, it must be guaranteed: a, the axial movement of the movable system is between 0.15 ~ 0.25mm; b. The air gap between the moving piece and the magnetic pole should be uniform. Under any action, the moving piece and the magnetic pole should not touch each other; c. During the action, the movable system must not be stuck in the middle position; d. When the pointer is rotated from the first scale to the maximum scale, the loops of the hairspring shall not touch each other; e. When the contact is in the open position, the total air gap between the static and dy
阅读全文

Analysis Of The Development Prospects Of Relay Industry

In the past ten years, China's information industry has developed rapidly at a rate three times that of other industries. The communications and automotive industries are also moving forward at a rapid pace. At the same time, the home appliance industry has begun to emerge as an important demand driver. With the overall improvement in the quality of life of Chinese products, more and more consumers are interested in new or upgraded appliances, which in turn stimulates the demand of  Power Relay . According to the forward-looking report of China's current relay industry market foresight and investment planning analysis released by Prospective Industry Research Institute, the use of relays in these industries is considerable. With the development of these industries, it will undoubtedly promote the further expansion of the relay market. In 2010, although the number of relay outlets decreased, the value of exports increased, indicating that the added value of the export relays
阅读全文