Pull-in Voltage And Release Voltage Of High Power Relays

As a Relay Electronics Manufacturer, let's talk about two concepts about relays.
Rated operating voltage, pull-in voltage, release voltage, contact resistance, dielectric withstand voltage, and insulation resistance are six commonly used parameters for relays.
Pull-in voltage
High Power Relays work when they are not connected to the rated voltage, so the pull-in voltage is the minimum voltage at which the relay can pick up. When designing the circuit, generally leave enough voltage, but not too much than the rated voltage, so that the relay can output stably, and it is also a kind of protection for the relay.
High Power Relays
2. Release voltage
High Power Relays are always released, so this release voltage is the maximum voltage at which the release action occurs, specifically the coil voltage at which the armature and contacts return to their original position.
The pull-in voltage can be measured in this way. If it is a DC input relay, it can be directly used as a DC power supply. The voltage is input to one end of the High Power Relays, and the voltage is slowly increased. When the relay is just picked up, this voltage is the pull-in voltage.
This withstand voltage is the withstand voltage that the relay can withstand. The test method is to test for 1 min and the leakage current is less than 1 mA.

评论

发表评论

此博客中的热门博文

How to Buy a Good Relay?

图片
As a  Power Relay Manufacturer , I often meet some customers who say that the quality of your relay is still ok, it is more expensive. Some customers say that I want good quality and cheaper prices. Here, we give everyone a generalization. In fact, the good or bad of Power Relay, 60% is determined by the contacts, reeds, outer casing, thin wire, base, etc. of the relay, and 40% of them are assembled in the relay. Determined in the process. Think about it, if the relay parts are poor, how well the relays are assembled on the production line, and will not make good  PCB Power Relays . Just like a chef, you give him poor raw materials, how good his cooking skills are, and he can't fry good dishes. Therefore, if you have a piece of money and a good quality, it will be more expensive. Power Relay So how do we see the relays are good and bad? If you are interested in researching and taking two different brands, you can see the difference if you study it carefully. Take our relay
阅读全文

What Are The Methods For Relay Debugging?

图片
What are the methods for  Relay Debugging ? The following small series explains for you: 1. Before using the relay, check whether there is any damage caused during transportation. Set the relay to the first setting point, turn the movable system to the magnetic pole direction by hand, and then release it. The movable system should be turned back to the original. Position until the stop. 2. When the relay is re-adjusted, it must be guaranteed: a, the axial movement of the movable system is between 0.15 ~ 0.25mm; b. The air gap between the moving piece and the magnetic pole should be uniform. Under any action, the moving piece and the magnetic pole should not touch each other; c. During the action, the movable system must not be stuck in the middle position; d. When the pointer is rotated from the first scale to the maximum scale, the loops of the hairspring shall not touch each other; e. When the contact is in the open position, the total air gap between the static and dy
阅读全文

Analysis Of The Development Prospects Of Relay Industry

In the past ten years, China's information industry has developed rapidly at a rate three times that of other industries. The communications and automotive industries are also moving forward at a rapid pace. At the same time, the home appliance industry has begun to emerge as an important demand driver. With the overall improvement in the quality of life of Chinese products, more and more consumers are interested in new or upgraded appliances, which in turn stimulates the demand of  Power Relay . According to the forward-looking report of China's current relay industry market foresight and investment planning analysis released by Prospective Industry Research Institute, the use of relays in these industries is considerable. With the development of these industries, it will undoubtedly promote the further expansion of the relay market. In 2010, although the number of relay outlets decreased, the value of exports increased, indicating that the added value of the export relays
阅读全文