What Should I Do If The Relay Contacts Are Loose And Cracked?

A considerable part of the components of the relay are riveted and fitted, and the main problem is that the riveting is loose or the bonding strength is poor. This kind of fault will make the relay parameters unstable, the parameters change greatly under high and low temperature, and the mechanical vibration and impact resistance are poor. The main cause of this problem is the poor condition of the riveting parts, the improper placement of the parts, the unqualified quality of the work tools or the inaccurate installation. Therefore, 48v Relay Supplier reminds you to carefully check whether the tool and the riveted parts meet the requirements before the welding.
The contact is the electrical contact part of the relay to complete the switching load. The contacts of some products are press-fitted by riveting. The main disadvantages are loose contact, cracked contact or excessive positional deviation. This will affect the contact reliability of the relay. The loosening of the erasing point occurs, which is caused by an unreasonable size of the mating portion of the reed and the contact or an improper adjustment of the riveting pressure by the operator. Contact cracking is caused by excessive material hardness or too much pressure. For different materials, the contacts are made of different materials. Some of the higher hardness contact materials should be annealed for contact manufacturing, riveting or spot welding. The manufacturing of the contacts should be careful. Since the materials have tolerances, the length of each cut should be determined after trial and error. Contact manufacturing should not result in flash, padding and underfill. The contact riveting is caused by the operator not correcting the touch and misaligning the upper and lower touches. Contact damage, contamination, oil contamination and iron filings on uncleaned tools. Regardless of the ills, it will affect the reliability of the relay. Therefore, in the process of contact manufacturing, riveting or electric welding, it is necessary to comply with the self-test regulations for the intermediate inspection and final inspection of the first piece to improve the assembly quality.
We have Power Relay For Sale, if you have any questions, please contact us.

评论

发表评论

此博客中的热门博文

How to Buy a Good Relay?

图片
As a  Power Relay Manufacturer , I often meet some customers who say that the quality of your relay is still ok, it is more expensive. Some customers say that I want good quality and cheaper prices. Here, we give everyone a generalization. In fact, the good or bad of Power Relay, 60% is determined by the contacts, reeds, outer casing, thin wire, base, etc. of the relay, and 40% of them are assembled in the relay. Determined in the process. Think about it, if the relay parts are poor, how well the relays are assembled on the production line, and will not make good  PCB Power Relays . Just like a chef, you give him poor raw materials, how good his cooking skills are, and he can't fry good dishes. Therefore, if you have a piece of money and a good quality, it will be more expensive. Power Relay So how do we see the relays are good and bad? If you are interested in researching and taking two different brands, you can see the difference if you study it carefully. Take our relay
阅读全文

What Are The Methods For Relay Debugging?

图片
What are the methods for  Relay Debugging ? The following small series explains for you: 1. Before using the relay, check whether there is any damage caused during transportation. Set the relay to the first setting point, turn the movable system to the magnetic pole direction by hand, and then release it. The movable system should be turned back to the original. Position until the stop. 2. When the relay is re-adjusted, it must be guaranteed: a, the axial movement of the movable system is between 0.15 ~ 0.25mm; b. The air gap between the moving piece and the magnetic pole should be uniform. Under any action, the moving piece and the magnetic pole should not touch each other; c. During the action, the movable system must not be stuck in the middle position; d. When the pointer is rotated from the first scale to the maximum scale, the loops of the hairspring shall not touch each other; e. When the contact is in the open position, the total air gap between the static and dy
阅读全文

Analysis Of The Development Prospects Of Relay Industry

In the past ten years, China's information industry has developed rapidly at a rate three times that of other industries. The communications and automotive industries are also moving forward at a rapid pace. At the same time, the home appliance industry has begun to emerge as an important demand driver. With the overall improvement in the quality of life of Chinese products, more and more consumers are interested in new or upgraded appliances, which in turn stimulates the demand of  Power Relay . According to the forward-looking report of China's current relay industry market foresight and investment planning analysis released by Prospective Industry Research Institute, the use of relays in these industries is considerable. With the development of these industries, it will undoubtedly promote the further expansion of the relay market. In 2010, although the number of relay outlets decreased, the value of exports increased, indicating that the added value of the export relays
阅读全文